Gold Member Since 2013
Audited Supplier
Shenzhen Quawin Technology Co., Ltd.

High Temperature Battery, Lithium-Ion Polymer Battery Pack, Lithium Polymer Battery manufacturer / supplier in China, offering 3.7V 4500mAh High Temperature Battery, 7.4V 9300mAh Rechargeable Li-ion Battery Pack, 2s3p 7.4V 7800mAh Lithium Battery and so on.

(/ )

Supplier Homepage Product Li-Polymer Battery Charger 3.7V 4500mAh High Temperature Battery

3.7V 4500mAh High Temperature Battery

FOB Price: Get Latest Price
Min. Order: 100 Pieces
Port: Hong Kong, Hong Kong
Production Capacity: 50000
Payment Terms: T/T, Western Union, Paypal

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: LP0037-4500-L
  • Connection Mode: Series and Parallel
  • Discharge Rate: Low Discharge Rate
  • Accessories Type: Battery
  • Standard Voltage: 1.5V~4.8V1.5V~4.8V
  • Delivery Date: 15days
  • Voltage: 3.7V
  • Trademark: QW
  • Specification: CE
  • HS Code: 850760000
  • Type: Lithium-Polymer Battery Pack
  • Rechargeable: Chargeable
  • Size: Medium
  • Rated Capacity: >1000MAH
  • Battery Type: Lipo Battery
  • Warranty: One Year
  • Capacity: 4500mAh
  • Transport Package: Box
  • Origin: China
Product Description
3.7V 4500mAh High Temperature Battery
Voltage3.7v
Capacity4500mah
Size7.7x64x74mm

Battery model: 3.7V LP776474HT

Specification
1. Capacity: 4500mAh
2. Nominal Voltage: 3.7V
3. Voltage of Discharge: 3.0V
4. Charging Voltage: 4.2 ± 0.03V
5. Nternal Impedance: ≤ 200mΩ
6. Discharge temperature: 0c~ 80c
7. Charge temperature: 0c~ 60c
8. Peak discharge current: 4.5AMPS
9. Connector and wire: 5264-3Y(Boyu brand) plug with length of 40mm wire: Pin 1 =negative pole, pin 2=positive pole, pin 3= NTC(temperature protection)
10. Max dimensions of battery pack: 8.0mmx65mmx75mm

Notice for Designing Battery Pack
7.1 Pack toughness
Battery pack should have sufficient strength and the LIP cell inside should be protected from
Mechanical shocks.
7.2 Cell fixing
The LIP cell should be fixed to the battery pack by its large surface area.
No cell movement in the battery pack should be allowed.
7.3 Inside design
No sharp edge components should be insides the pack containing the LIP cell.
7.4 Tab connection

Ultrasonic welding or spot welding is recommended for LIP tab connection method.
Battery pack should be designed that shear force are not applied to the LIP tabs.

If apply manual solder method to connect tab with PCM, below notice is very important to
Ensure battery performance:
The solder iron should be temperature controlled and ESD safe;
Soldering temperature should not exceed 350° C;
Soldering time should not be longer than 3s;
Soldering times should not exceed 5 times, Keep battery tab cold down before next time
Soldering;
Directly heat cell body is strictly prohibited, Battery may be damaged by heat above
Approx. 90° C
Send your message to this supplier
Avatar
Ms. Tina
Sales Director
*From:
To: Ms. Tina
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now